INON

Video Bases

The INON "Video Base" is dedicated accessory carrying versatile usability to attach a video light etc. on Canon "WP-V4", "WP-V3", "WP-V2", "WP-V1" water-proof case which is for Canon HD digital camcorder "iVIS HF series". The "Video Base" consists of a Base Plate which is designed to fit to water-proof case base with tripod screws and Port Unit attached on the water-proof case with pressure bonding. This design structure enables to hold optional accessories securely without excessive load on tripod-screw mount of the water-proof case.
The Video Base supports wide selection of INON accessories including attachment lenses, LED flashlights and lighting arms to set up perfect underwater video system depending on shooting style.

 
Video Base

Video Base V4

[discontinued]

Video Base V4

Exclusively for
Canon WP-V4 (iVIS HF M51, iVIS HF M52)
Weight:
197g (6.9oz) [air]
approx.122g (4.3oz) [underwater]

Video Base V2

[discontinued]

Video Base V2

Exclusively for
Canon WP-V3 (iVIS HF M41, iVIS HF M41)
Canon WP-V2 (iVIS HF M31)
Weight:
202g (7.1oz) [air]
approx.125g (4.4oz) [underwater]

Video Base V1

[discontinued]

Video Base V1

Exclusively for
Canon WP-V1 (iVIS HF 20, iVIS HF21)
Weight:
192g (6.8oz) [air]
approx.119g (4.2oz) [underwater]

Flexible lighting arm configuration

The Video Base can have compact "Shoe Base" on top of the lens port and two D Holder on both sides to support simple and compact set-up and upgrading to multi lighting system only with compatible flashlight(s) and lighting arm product(s).
 
*Canon water-proof balance weight [WW-DC1] is not usable together with the "Video Base V2", "Video Base V1". If you do not use attachment lens nor LED flashlight etc., please combine with other accessory to get slightly negative underwater buoyancy to avoid accidental rapid ascent.

Supports various am configurations in combination of [D Holder] and [Shoe base].
Supports various am configurations in combination of [D Holder] and [Shoe base].

No obstruction to take out or put in a camcorder

The Video Base and combined "Shoe Base" / "D Holder" does not obstruct to open / close the water-proof case and will not bother you when you need to change batteries with these accessories.

You can open / close an underwater case even with two [D Holder] on both sides.
You can open / close an underwater case even with two [D Holder] on both sides.

Compatible with M67 series lens

The Canon "WP-V4", "WP-V3", "WP-V2", "WP-V1" water-proof case is equipped with 67mm threaded lens ring where you can directly attach INON M67 series lens or INON 28M67 series lens.

イノンのアタッチメントレンズ、LEDライト、アームなどを組み合わせて、本格的な撮影にも対応Supports professional videography with INON attachment lenses,
Supports professional videography with INON attachment lenses,
LED flashlights and lighting arms.

Camera Housing Compatible Lens Comaptible
Video Base
close-up wide super wide
iVIS HF20 WP-V1 UCL-330
UCL-165M67
UWL-100 Achromat Type2  (*1)(*3) (*2) Video Base V1
iVIS HF21
iVIS HF M31 WP-V2 UCL-330
UCL-165M67
UWL-100 Achromat Type2  (*1)(*3) (*2) Video Base V2
iVIS HF M41 WP-V3 UCL-330
UCL-165M67
UWL-H100 28M67 Type2  (*4) Dome Lens Unit II
for UWL-H100  (*5)
Video Base V2
iVIS HF M43
iVIS HF M51 WP-V4 UCL-330
UCL-165M67
UWL-H100 28M67 Type2  (*6) Dome Lens Unit II
for UWL-H100  (*6)
Video Base V4
iVIS HF M52

 

(*1) The "UWL-100 Achromat Type2" is originally designed for a digital camera carrying 1/1.8 inch image sensor (CCD etc.), approx. 7mm focal length at zoom wide end (35mm film equivalent: 35mm) and approx. 3x zoom lens, and not designed for a digital camcorder iVIS HF20, iVIS HF21, iVIS HF M31 which carries 1/4 inch image sensor, 4.1mm focal length (35mm film equivalent: 39.5mm) and 15x zoom lens.
Our detailed compatibility test has confirmed that there is significant degradation of image quality on circumference part of an image comparing to compatible digital camera, so "compatibility is limited" only for those can accept below sample images / movies quality.
 
(*2) The combination of "UWL-100 Achromat Wide Conversion Lens Type2" and its super wide option "Dome Lens Unit for UWL-100" is NOT compatible since this combination has more significant image quality deterioration than above "UWL-100 Achromat Type2" stand-alone use. Please refer below sample image / movie to see image quality with this combination.
 
(*3) The UWL-100 Achromat Wide Conversion Lens "Type1" is not physically attached on the WP-V1/WP-V2. However UWL-100 Achromat "Type1" can be modified to UWL-100 Achromat "Type2". Please contact your purchasing dealer for detail.
 
(*4) It is recommended to use "UWL-H100 28M67 [Type2]" for its optical compatibility rather than using "UWL-H100 28M67 [Type1]" / "UWL-H100 28M67[Type2]" though both of them are physically attached on the water-proof cases. Optional "M67 Screw Ring Set for UWL-H100 28M67 Type2" allows you to change from Type1 to Type2.
"UWL-100 Achromat [Type1]" is not physically attached and "UWL-100 Achromat [Type2]" is not optically compatible.

Sample movie by (*1)(*2)

Sampale Movie1

· Dome Lens Unit for UWL-100 + UWL-100 Type2
· Zoom wide end
· Auto Mode
· LE250 LED flashlight
· Canon iVIS HF20 / WP-V1

Sampale Movie2

· Compare "Dome Lens Unit for UWL-100"+"UWL-100 Type2" with "UWL-100 Type2" alone
· Auto Mode
· LE250 LED flashlight
· Canon iVIS HF20 / WP-V1

Sampale Movie3

· "UWL-100 Type2" (part of the movie)
· The macro imaging uses zoom middle range for higher magnification
· Auto Mode
· LE250 LED flashlight + W50°Filter LE
· Canon iVIS HF20 / WP-V1

Sample movie by (*5)

Sample movie by (*6)

Sample Movie4

· Dome Lens Unit II for UWL-H100
+ UWL-H100 28M67 Type2
· Canon iVIS HF M41 / WP-V2

Sample Movie5

· Compare "Dome Lens Unit II for UWL-H100"+"UWL-H100 28M67 Type2" with "UWL-H100 28M67 Type2" alone
· Canon iVIS HF M51 / WP-V4

Compatible Lens

UCL-330

UCL-330

UCL-165M67

UCL-165M67

UWL-100 Achromat Type2

UWL-100 Achromat Type2

UWL-H100 28M67 Type2

UWL-H100 28M67 Type2

Dome Lens Unit II for UWL-H100

Dome Lens Unit II for UWL-H100

Compatible Option

D Holder

D Holder

Shoe Base II

Shoe Base II

LE550-W

LE550-W

Arm System

Arm System

Setup Example

Shoe Base + Single Flashlight Set

Single LE550-W set attached on the lens port via Shoe Base.

click to enlarge

Part Configuration
1) Video Base V2
2) Shoe Base
3) Single Light Holder LE
4) LED Light

D Holder + Single Flashlight Set

Single LE550-W set attached on a D Holder extended from the base plate.

click to enlarge

Part Configuration
1) Video Base V2
2) D Holder
3) Multi Direct Base II
4) Clamp
5) YS Adapter
6) Single Light Holder LE
7) LE550-W

D Holder + Double Flashlight Set

Dual LE550-W set attached on D Holders extended from the base plate.

ベースプレートにDホルダーを1個接続し、LE550-Wを1灯取り付けたセット

Part Configuration
1) Video Base V2
2) D Holder x2
3) Multi Direct Base II x2
4) Clamp x2
5) YS Adapter x2
6) Single Light Holder LE x2
7) LED Light x2