XD Mount
XD Mount for M67 Port
JAN/EAN code : 4570018120329
An adapter attached to the M67 screw on the port end to convert to "XD mount" enabling instant attachment of various INON XD Mount close-up lenses, variable red filter and commercially available ND filters. Ultra thin design keeps the camera lens and conversion lens close together. Despite being an optional part, it maintains quality image when using various close-up lenses.
Compatible port
M86 Port 07
M86 Port 17
M86 Port 49
M86 Port 55
An adapter attached to the M67 screw on the port end to convert to "XD mount" enabling instant attachment of various INON XD Mount close-up lenses, variable red filter and commercially available ND filters. Ultra thin design keeps the camera lens and conversion lens close together. Despite being an optional part, it maintains quality image when using various close-up lenses.
Compatible port
M86 Port 07
M86 Port 17
M86 Port 49
M86 Port 55
Finder Unit
Straight Viewfinder Unit II D10
JAN/EAN code : 4570018121067
Compact, Lightweight Straight Viewfinder with Bright, High-Resolution Optics
A large, low-loss prism delivers a clear, edge-to-edge view with minimal distortion.
Maintains 1.0x magnification and extends the underwater eye point to 60mm for easy viewing, even with a mask.
Durable hybrid body of corrosion-resistant aluminum and reinforced plastic.
Requires X-2 Viewfinder Tool for installation.
Weight : 305g/10.7oz[Air]
|
The Straight Viewfinder II for X-2 will not fit the X-2 R5 Mark II with serial number D440984 or later without modification. Please contact your dealer for more information.
|
Compact, Lightweight Straight Viewfinder with Bright, High-Resolution Optics
A large, low-loss prism delivers a clear, edge-to-edge view with minimal distortion.
Maintains 1.0x magnification and extends the underwater eye point to 60mm for easy viewing, even with a mask.
Durable hybrid body of corrosion-resistant aluminum and reinforced plastic.
Requires X-2 Viewfinder Tool for installation.
Weight : 305g/10.7oz[Air]
|
The Straight Viewfinder II for X-2 will not fit the X-2 R5 Mark II with serial number D440984 or later without modification. Please contact your dealer for more information.
|
45°Viewfinder Unit II D10
JAN/EAN code : 4570018121050
A 45° angled viewfinder compatible with the enlarged eye-cup of the EOS R5 Mark II. Maintains 1.0x magnification and extends the underwater eye point to 60mm for easy viewing, even with a mask. 45° angled eyepiece for low-angle subjects like gobies on sandy bottoms. 360° rotation allows flexible framing, even for vertical shots.
Requires X-2 Viewfinder Tool for installation.
Weight : 337g/11.9oz[Air]
| The 45° Viewfinder Unit for X-2 and the 45° Viewfinder Unit II for X-2 cannot be mounted directly on the X-2 R5 Mark II housing. Modification to the D10 version is required. For details, please contact your dealer. |
A 45° angled viewfinder compatible with the enlarged eye-cup of the EOS R5 Mark II. Maintains 1.0x magnification and extends the underwater eye point to 60mm for easy viewing, even with a mask. 45° angled eyepiece for low-angle subjects like gobies on sandy bottoms. 360° rotation allows flexible framing, even for vertical shots.
Requires X-2 Viewfinder Tool for installation.
Weight : 337g/11.9oz[Air]
| The 45° Viewfinder Unit for X-2 and the 45° Viewfinder Unit II for X-2 cannot be mounted directly on the X-2 R5 Mark II housing. Modification to the D10 version is required. For details, please contact your dealer. |
Lock Ring Tool for X-2 Finder Unit
JAN/EAN code : 4562121433052
Required tool to attach and remove a viewfinder unit on the housing.
Required tool to attach and remove a viewfinder unit on the housing.
Cable
Optical D Cable Type L Rubber Bush Set 2
Fiber optics products to connect the housing and compatible strobe via optical cable adapter. Four different lengths to select; Optical D Cable Type L Rubber Bush Set 2 (free length approx. 43 cm/17 in.), Optical D Cable L Type L Rubber Bush Set 2 (free length approx. 68 cm/27 in.), Optical D Cable LL Type L Rubber Bush Set 2 (free length approx. 110 cm/43 in.) or Optical D Cable SS Type L Rubber Bush Set 2 (free length approx. 24 cm/9 in.)
Fiber optics products to connect the housing and compatible strobe via optical cable adapter. Four different lengths to select; Optical D Cable Type L Rubber Bush Set 2 (free length approx. 43 cm/17 in.), Optical D Cable L Type L Rubber Bush Set 2 (free length approx. 68 cm/27 in.), Optical D Cable LL Type L Rubber Bush Set 2 (free length approx. 110 cm/43 in.) or Optical D Cable SS Type L Rubber Bush Set 2 (free length approx. 24 cm/9 in.)
Tray, Handle
Quick Shoe Main Base Set
JAN/EAN code : 4570018121081
Set includes:
- Quick Shoe Main Base
- Quick Shoe W50 Plate ×2
- D5 Holder ×2
This grip stay is compatible with INON’s proprietary Arca-Swiss style “Quick Shoe” system. Two Quick Shoe W50 Plates are mounted on the housing body, allowing quick switching between landscape and portrait orientation without changing the lighting position, and enabling smooth vertical low-angle shooting.
Set includes:
- Quick Shoe Main Base
- Quick Shoe W50 Plate ×2
- D5 Holder ×2
This grip stay is compatible with INON’s proprietary Arca-Swiss style “Quick Shoe” system. Two Quick Shoe W50 Plates are mounted on the housing body, allowing quick switching between landscape and portrait orientation without changing the lighting position, and enabling smooth vertical low-angle shooting.
Grip Base D5 Set
JAN/EAN code : 4570018121098
Set Includes:
- Grip Base D5
- D5 Holder x 2
A durable and affordable standard grip stay. Using the Grip Base D5 with two D5 Holders, arms can be attached from both left and right sides.
Set Includes:
- Grip Base D5
- D5 Holder x 2
A durable and affordable standard grip stay. Using the Grip Base D5 with two D5 Holders, arms can be attached from both left and right sides.
Base Adapter
Direct Base III
JAN/EAN code : 4562121436541
A ball adapter attached on the "D5 Holder" equipped on both sides of the housing.
An arm system can be attached via "Clamp III".
Full length : 45mm/1.8in
Effective length : 32mm/1.3in
Weight : 35g/1.2oz[Air]/approx.23g/0.8oz[Underwater]
A ball adapter attached on the "D5 Holder" equipped on both sides of the housing.
An arm system can be attached via "Clamp III".
Full length : 45mm/1.8in
Effective length : 32mm/1.3in
Weight : 35g/1.2oz[Air]
/approx.23g/0.8oz[Underwater]
Lanyard Plate
D5 Lanyard Plate 2
JAN/EAN code : 4570018120541
Installing this plate on top of the D5 Holder enables to attach a commercially available lanyard.
The lanyard eyelet location can be selected from 8 directions ( Direct Base III), or 4 directions (Multi Direct Base II).
Size : W33.6 x H47.8 x T1.5mm /W1.3 x H1.8 x T0.05in
Weight : 52g/1.8oz[Air]/approx. 42g/1.5oz[Underwater]
Material : Stainless
Installing this plate on top of the D5 Holder enables to attach a commercially available lanyard.
The lanyard eyelet location can be selected from 8 directions ( Direct Base III), or 4 directions (Multi Direct Base II).
Size : W33.6 x H47.8 x T1.5mm /W1.3 x H1.8 x T0.05in
Weight : 52g/1.8oz[Air]
/approx. 42g/1.5oz[Underwater]
Material : Stainless
Quick Shoe
Quick Shoe W27 Set
JAN/EAN code : 4570018120169
Quick Shoe W27 Set Setup example
Compact Quick Shoe with 27 mm/1.1 inch width. Set of the Quick Shoe W27 Plate and Quick Shoe W27 Clamp.
Attached on the "D5 Holder" to easily attach and detach combined base stay and ball arm underwater.
Full length : 95mm/3.7in
Weight : 90g/3.1oz[Air]/approx.60g/2.1oz[Underwater]
Quick Shoe W27 Set Setup example
Compact Quick Shoe with 27 mm/1.1 inch width. Set of the Quick Shoe W27 Plate and Quick Shoe W27 Clamp.
Attached on the "D5 Holder" to easily attach and detach combined base stay and ball arm underwater.
Full length : 95mm/3.7in
Weight : 90g/3.1oz[Air]
/approx.60g/2.1oz[Underwater]
Shoe Base
Shoe Base II
JAN/EAN code : 4562121438705
A YS mount adapter to use on an accessory shoe of the housing. The base part rotates 360 degree which benefit you to adjust aiming of combined lighting system sideways in addition to up and down adjustment.
Compatible products (YS joint)
Full length : 52mm/2.0in
Weight : 45g/1.5oz[Air]/approx.20g/0.7oz[Underwater]
A YS mount adapter to use on an accessory shoe of the housing. The base part rotates 360 degree which benefit you to adjust aiming of combined lighting system sideways in addition to up and down adjustment.
Compatible products (YS joint)
Full length : 52mm/2.0in
Weight : 45g/1.5oz[Air]
/approx.20g/0.7oz[Underwater]
Shoe Base BALL
JAN/EAN code : 4562121438521
A ball adapter attached on the accessory shoe of the housing. An arm system can be attached via "Clamp III".
Full length : 55mm/2.1in
Weight : 52g/1.8oz[Air]/approx.28g/0.9oz[Underwater]
A ball adapter attached on the accessory shoe of the housing. An arm system can be attached via "Clamp III".
Full length : 55mm/2.1in
Weight : 52g/1.8oz[Air]
/approx.28g/0.9oz[Underwater]
Cover
Dome Port Cover S (OR)
JAN/EAN code : 4570018120763
The orange color dramatically improves visibility underwater/surface.
The Dome Port Cover S is made of neoprene as same as wet suits. It is recommended to cover compatible dome lens all the time to prevent accidental damage unless shooting images. The Dome Port Cover S has slits on its top and bottom to help easy and speedy installation/removal on a dome lens/port equipped with a hood.
Compatible port
M86 Dome Port 110
M96 Dome Port 110
The orange color dramatically improves visibility underwater/surface.
The Dome Port Cover S is made of neoprene as same as wet suits. It is recommended to cover compatible dome lens all the time to prevent accidental damage unless shooting images. The Dome Port Cover S has slits on its top and bottom to help easy and speedy installation/removal on a dome lens/port equipped with a hood.
Compatible port
- M86 Dome Port 110
- M96 Dome Port 110
Dome Port Cover L
JAN/EAN code : 4562121438927
The Dome Port Cover L is made of neoprene as same as wet suits. It is recommended to cover compatible dome lens all the time to prevent accidental damage unless shooting images. The Dome Port Cover L has slits on its top and bottom to help easy and speedy installation/removal on a dome lens/port equipped with a hood.
Compatible port
- Dome Port II Protector II Set
The Dome Port Cover L is made of neoprene as same as wet suits. It is recommended to cover compatible dome lens all the time to prevent accidental damage unless shooting images. The Dome Port Cover L has slits on its top and bottom to help easy and speedy installation/removal on a dome lens/port equipped with a hood.
Compatible port
- Dome Port II Protector II Set
Cap
Snap-on Lens Cap M67
JAN/EAN code : 4562121437227
The Snap-on Lens Cap M67 is a plastic lens cap for close-up lenses and digital SLR housing lens ports to protect front optical element. Spring loaded center tabs provide easy installation and removal only by squeezing the tabs. Packaged lanyard to avoid loss of the lens cap when not being attached on a lens/port.
Compatible port:
- M86 Port 07
- M86 Port 17
- M86 Port 49
- M86 Port 55
The Snap-on Lens Cap M67 is a plastic lens cap for close-up lenses and digital SLR housing lens ports to protect front optical element. Spring loaded center tabs provide easy installation and removal only by squeezing the tabs. Packaged lanyard to avoid loss of the lens cap when not being attached on a lens/port.
Compatible port:
- M86 Port 07
- M86 Port 17
- M86 Port 49
- M86 Port 55
Snap-on Lens Cap M67 attached on lens port.
M86 Rear Port Cap
JAN/EAN code : 4570018120923
A rear port cap for M86 thread lens ports to protect the port O-ring during transportation and storage. Designed to vent air not to have excessive pressure inside when transporting in airplanes.
Compatible Port
M86 Dome Port 110
M86 Port 07
M86 Port 17
M86 Port 49
M86 Port 55
M86 Port 82
A rear port cap for M86 thread lens ports to protect the port O-ring during transportation and storage. Designed to vent air not to have excessive pressure inside when transporting in airplanes.
Compatible Port
M86 Dome Port 110
M86 Port 07
M86 Port 17
M86 Port 49
M86 Port 55
M86 Port 82
M96 Rear Port Cap
JAN/EAN code : 4570018120930
A rear port cap for M96 thread lens ports to protect the port O-ring during transportation and storage. Designed to vent air not to have excessive pressure inside when transporting in airplanes.
Compatible Port
M96 Dome Port 110
Dome Port II･ Protector II Set
Dome Port 115
MRS EXT. Ring33
MRS EXT. Ring50
MRS EXT. Ring54
MRS EXT. Ring111
EXT. Ring18
EXT. Ring36
A rear port cap for M96 thread lens ports to protect the port O-ring during transportation and storage. Designed to vent air not to have excessive pressure inside when transporting in airplanes.
Compatible Port
M96 Dome Port 110
Dome Port II･ Protector II Set
Dome Port 115
MRS EXT. Ring33
MRS EXT. Ring50
MRS EXT. Ring54
MRS EXT. Ring111
EXT. Ring18
EXT. Ring36
Housing Body Cap
JAN/EAN code : 4562121430136
A cap for port mount of a housing to protect O-ring contact surface. The cap is designed to equalize with ambient pressure when transporting in an aircraft.
A cap for port mount of a housing to protect O-ring contact surface. The cap is designed to equalize with ambient pressure when transporting in an aircraft.
Service Parts
X-2 Main O-ring 175
Spare oil-bearing INON yellow O-ring for housing body.
Compatible Housing
X-2 R5
X-2 R5 Mark II
X-2 R6
X-2 R6 Mark II
X-2 for EOS10D
X-2 for EOS20D
X-2 for EOS30D
X-2 for EOS50D/40D
X-2 for EOS60D
X-2 for EOS70D
X-2 for EOS6D
X-2 for GF1
X-2 for GF2
Spare oil-bearing INON yellow O-ring for housing body.
Compatible Housing
X-2 R5
X-2 R5 Mark II
X-2 R6
X-2 R6 Mark II
X-2 for EOS10D
X-2 for EOS20D
X-2 for EOS30D
X-2 for EOS50D/40D,
X-2 for EOS60D
X-2 for EOS70D
X-2 for EOS6D
X-2 for GF1
X-2 for GF2
O-ring for Port/Extension Ring
Spare oil-bearing INON yellow O-ring for M96 threaded port/EXT. Ring.
Compatible Port
MRS Extension Ring 33
MRS Extension Ring 111
Extension Ring 18
Extension Ring 36
Spare oil-bearing INON yellow O-ring for M96 threaded port/EXT. Ring.
Compatible Port
MRS Extension Ring 33
MRS Extension Ring 111
Extension Ring 18
Extension Ring 36
O-ring for M86 Port
Spare oil-bearing INON yellow O-ring for M86 threaded port.
Compatible Port
M86 Dome Port 115
M86 Port 07
M86 Port 17
M86 Port 49
M86 Port 55
M86 Port 82
Spare oil-bearing INON yellow O-ring for M86 threaded port.
Compatible Port
M86 Dome Port 115
M86 Port 07
M86 Port 17
M86 Port 49
M86 Port 55
M86 Port 82
INON Grease
Grease exclusively for oil bearing INON yellow O-ring.
Grease exclusively for oil bearing INON yellow O-ring.
GX Corrosion Suppression Unit
Optional replacement unit when pre-installed unit gets worn. The unit suppresses housing corrosion by oxidizing before the housing body gets rusted.
Optional replacement unit when pre-installed unit gets worn. The unit suppresses housing corrosion by oxidizing before the housing body gets rusted.