INON

Lens Option

Lens Hood II

[discontinued]

click to enlarge
A lens hood specifically designed for series of UWL-H100 Wide Conversion Lenses. The hood position is adjustable to accommodate with screw mount UWL-H100 28M67 Type1/Type2 as well as UWL-H100 28LD. The hood blocks unnecessary ambient light in back-lit condition etc. to prevent ghost/flare and also protects lens surface from accidental damage.
 
Outer diameter: φ114mm (4.5in)
Length: [standalone] 53mm (2.1in)
     : [with UWL-H100 28LD] 73mm (2.9in)
     : [with UWL-H100 28M67] 73mm (2.9in)
Weight: [standalone] 54g (1.9oz) [air] / approx.8g (0.3oz) [underwater]
     : [with UWL-H100 28LD] 584g (20.6oz) [air] / approx.334g (11.8oz) [underwater]
     : [with UWL-H100 28M67 Type1] 609g (21.5oz) [air] / approx.353g (12.5oz) [underwater]
     : [with UWL-H100 28M67 Type2] 610g (21.5oz) [air] / approx.354g (12.5oz) [underwater]
 
*Not usable together with "Dome Lens Unit II for UWL-H100" .
 
[Compatible Lens]
UWL-H100 28LD
UWL-H100 28M67
Attached on the UWL-H100 28LD

Attached on the UWL-H100 28LD

Attached on the UWL-H100 28M67

Attached on the UWL-H100 28M67

 

■Lens Hood for UWL-H100 28LD

  [Discontinued]

click to enlarge
The Lens Hood specifically designed for UWL-H100 28LD to shade unnecessary light from outside of view angle and reduce flare / ghost which could happen in backlit condition. The hood also protects lens surface. We recommend to attach the lens hood on UWL-H100 28LD always when shooting.
 
■Outer diameter: φ114mm (4.5in)
■Length: [standalone] 54mm (2.1in)
     : [with UWL-H100 28LD] 73mm (2.9in)
■Weight: [standalone] 56.7g (2.0oz) [air] / approx.11g (0.4oz) [underwater]
     : [with UWL-H100 28LD] 586.7g (20.7oz) [air] / approx.337g (11.9oz) [underwater]
 
*Not usable together with "Dome Lens Unit II for UWL-H100" .
 
[Compatible Lens]
UWL-100 28LD

■Lens Hood for UWL-100 28AD

  [Discontinued]

click to enlarge
The hood blocks unnecessary ambient light in back-lit condition etc to prevent ghost / flare and also protect the lens surface from damage.
 
■Outer diameter: φ114mm (4.5in.)
■Length: [standalone] 52.7mm (2.1in.)
     : [with UWL-100 28AD] 70.5mm (2.8in.)
■Weight: [standalone] 95g (3.4oz) [air] / approx.33g (1.2oz) [underwater]
     : [with UWL-100 28AD] 466g (16.4oz) [air] / approx.252g (8.5oz) [underwater]
 
*Not usable together with "Dome Lens Unit II for UWL-100" and "Dome Lens Unit for UWL-100"
 
[Compatible Lens]
UWL-100 28AD
page top

■Dome Lens Unit Cover

  [Discontinued]

Dome Lens Unit Cover
The Dome Lens Unit Cover is made of neoprene which is used for wet suits. It is recommended to cover Dome Lens Unit with this Dome Lens Unit Cover until just before you use to prevent accidental damage.
 
[Compatible Lens]
Dome Lens Unit II for UWL-H100
Dome Lens Unit II for UWL-100
Dome Lens Unit for UWL-100
page top

AD Mount Converter for UCL-165AD

  [Discontinued]

click to enlarge
The converter is used to attach "UCL-165AD Close-up Lens" on "28AD Mount Base DC35" / "28AD Mount Base MDFT2" / "28AD Mount Base MDFT1" / "28AD Mount Base DC40" / "28AD Port PT-027/020" for macro shot. (The converter is not necessary for other 28AD Mount Base.)
 
*The AD Mount Converter for UCL-165AD is not necessary for a Mount Base except for "28AD Mount Base DC35" / "28AD Mount Base MCFT2" / "28AD Mount Base MCFT1" / "28AD Mount Base DC40" / "28AD Port PT-027/020" to attach the UCL-165AD
*Vignetting at zoom / wide end. Zoom towards to telephoto side.
 
Weight: 13.8g (0.5oz) [air] / approx.3g (0.1oz) [underwater]
 
[Compatible Lens]
UCL-165AD
page top