INON > Products Information > Action Camera > for OLYMPUS > SD Mount Base TG-Tracker

Underwater Accessories for Action Camera

■SD Mount Base for TG-Tracker

SD Mount Base for TG-Tracker
SD Mount Base for TG-Tracker SetupSD Mount Base for TG-Tracker Bottom

The SD Mount Base for TG-Tracker is a simple solution to add an attachment lens or arm system on Olympus TG-Tracker.



■Compatible cameras
OLYMPUS STYLUS TG-Tracker

●SD Mount Supports Speedy Lens Exchange

Equipped with INON "SD Mount" bayonet system. With "SD Mount", INON "UFL-G140 SD" underwater semi-fisheye conversion lens or "UCL-G165 SD" underwater wide close-up lens exclusively designed for an action camera, can be easily and securely mounted/detached underwater. Of course you can use the SD Mount Base for TG-Tracker without any attachment lens.

Recommended shooting distance
UFL-G140 SD
Underwater Semi-fisheye Conversion Lens
 1cm/0.4in to 80cm/2.6ft
 from lens surface
UCL-G165 SD
Underwater Wide Close-up Lens
 2cm/0.8in to 15cm/5.9in
 from lens surface

* It is recommended to use compatible attachment lenses within recommended shooting distance.
* Activate image stabilization function of the camera while shooting video to avoid vignetting.
* When taking still images, do not use attachment lens to avoid significant vignetting on image corners.
* Both UFL-G140 SD and UCL-G165 SD are designed for underwater use only and not usable on land.

SD Mount supports speedy UFL-G140 SD lens exchangeUFL-G140 SD
SD Mount supports speedy UCL-G165 SD lens exchangeUCL-G165 SD

 

●Compact Lightweight Mount Base

Compact yet durable Mount Base is designed not to compromise benefit of lightweight TG-Tracker. Easy to install to snap on the front of the UP-T01 Underwater Protector and fix with tripod screw on the bottom.

Lightweight

 

●Versatility

The SD Mount Base for TG-Tracker is equipped with a screw hole on its bottom to hold INON "Direct Base III", "Z Joint" or "Z Adapter MV" to install TG-Tracker camera on various systems for broad application. Packaged "Male Adapter (GoPro) for SD Mount Base/SD Front Mask" to be attached on the bottom of the SD Mount Base enables to utilize "SG-T01 Steady Grip" that comes with TG-Tracker or your GoPro® compatible mounts.

VersatilitySG-T01 Steady Grip

 

●Stability

Packaged "Mount Adapter for SD Mount Base/SD Front Mask" enables to add one INON "D Holder" on this product in 3 ways (right/left/back) for steady underwater imaging.

the optional D Holder on the left sidethe optional D Holder on the aft side

 

●Tripod Shooting

Packaged "Mount Adapter for SD Mount Base/SD Front Mask" further enables to attach the SD Mount Base for TG-Tracker on a tripod or monopod.

Tripod Shooting

 

Size 65.4mm/2.6in (W) × 65.4mm/2.6in (H) × 94.7mm/3.7in (D) (including protruded parts)
Weight [air] 78g/2.8oz
[underwater] approx. 45g/1.6oz
Material/finishing Corrosion resistant aluminum alloy / rigid black alumite, POM etc.

 

[When using SD Mount Base TG-Tracker]
* SD Mount Base for TG-Tracker is designed to use with "UP-T01 Underwater Protector" and [Underwater wide] mode is chosen on the camera. Not compatible to use with "LP-T01 Lens Protector" for land photography.
* Significant vignetting on image corners even without attachment lens on land in any shooting mode/field of view setting. No vignetting underwater.
* Built-in headlamp of the TG-Tracker is not usable as this product covers it. Make sure to turn off the headlamp while using the camera with this product.
* Both UFL-G140 SD and UCL-G165 SD are designed for underwater use only and not usable on land.

 

Compatible Accessories

D Holder

D Holder

Direct Base III

Direct Base III

Z Joint

Z Joint

Z Adapter MV

Z Adapter II

LED flashlight

LED flashlight

Arm System

arm.jpg

Carbon Telescopic Arm

bon Telescopic Arm

*Olympus, STYLUS and TG-Tracker are trademarks or registered trademarks of Olympus Imaging Corp.

page top