INON

Optical D Slave Cable Type L

Optical D Slave Cable II Type L

JAN code : 4562121434929

Manual
Optical D Slave Cable II Type L

Compatible Strobe:
Z-240 / D-2000 series / D-180 series / Z-220 series

Optical D Slave Cable III Type L

JAN code : 4562121434936

Manual
Optical D Slave Cable III Type L

Compatible Strobe:
S-2000

An optical cable product to connect two INON strobes. A light receiving part is attached on front surface of a main strobe which is triggered by a camera signal to transmit main strobe's flash light to a sub strobe via optical fiber to fire the sub strobe simultaneously supporting reliable operation and free from synch problem even in bright area. The Optical D Slave Cable is useful to expand your lighting system even camera's optical connector is limited. Two types are available depending on a main strobe to use.

S-2000 quad strobe configuration by Optical D Slave Cable III Type L

S-2000 quad strobe configuration by Optical D Slave Cable III Type L

[Optical D Slave Cable II] compatible strobe (*1)

Master Strobe (Main Strobe)
INON Z-240, D-2000, D-2000S, D-2000W/Wn,
D-180, D-180S, Z-220, Z-220F, Z-220S

The Z-330 / D-200 strobe is not usable as a master strobe.

 
Slave Strobe (Sub strobe)
[Strobes compatible with pre-installed L-Connector.]
INON Z-330, D-200, S-2000, Z-240 Type4, D-2000 Type4
 
[Strobes requiring replacement of pre-installed L-Connector with optional "Sensor Plug Non-wireless".]
Z-240 Type3/Type2/Type1, D-2000 Type4/Type2/Tyep1, D-2000S, D-2000W/Wn, D-180, D-180S, Z-220, Z-220F, Z-220S, Z-22(*2)
 
(*1) This product is also attached on following diffusers for compatible master strobes and supplied "-0.5 Diffuser" / "-1.5 Diffuser" included in Z-240. The Z-240 shipped after July 2009 comes with -0.5 White Diffuser 2 only. Following compatible "diffusers" are available as optional accessory;
 
sold separately option
[-0.5 White Diffuser (External Auto)], [-0.5 White Diffuser 2 (External Auto)]
[-0.5 Blue Diffuser (External Auto)], 「-0.5 Blue Diffuser 2 (External Auto)]
[-1.5 White Diffuser (External Auto)], 「-1.5 White Diffuser 2 (External Auto)]
[-1.5 Blue Diffuser (External Auto)], 「-1.5 Blue Diffuser 2 (External Auto)]
[-0.5 White Diffuser (TTL / Manual)], 「-0.5 White Diffuser 2 (TTL / Manual)]

[-0.5 Blue Diffuser (TTL / Manual)], 「-0.5 Blue Diffuser 2 (TTL / Manual)]
[-1.5 White Diffuser (TTL / Manual)], 「-1.5 White Diffuser 2 (TTL / Manual)]
[-1.5 Blue Diffuser (TTL / Manual)], 「-1.5 Blue Diffuser 2 (TTL / Manual)]
["-3 White Diffuser (Manual)"]

 
(*2)TTL operation (TTL slave) is available only for master strobe; [Z-220] / [Z-220F] / [Z-220S]. Optional [TTL Sensor Z] or [Focus Light Controller] is necessary to use the [Z-22] as a slave strobe.

 
with Optical D Slave Cable II
with Optical D Slave Cable II

For master strobe Z-240[Type4 / Type3] / D-2000[Type4 / Type3], make sure to use this product to connect to a slave strobe to ensure proper operation. [Optical D Slave Cable Type L] / [Optical D Slave Cable] is NOT usable.
When different strobes are used as a master and a slave, unintentional imbalance may be observed except both strobes are set to Manual mode. [e.g. Imbalance flash output though intending to create "flat lighting" with equal flash output from master / slave strobe etc.]
This is normal because each strobe model has unique specification like [maximum flash power / flash time / flash intensity per unit time] or imbalance caused by operational characteristic of slave flashing in each auto flash mode.
To adjust flash output balance, [flash output adjustment on each strobe], [using appropriate"diffuser"] or [attaching both strobe directly to camera system (without using this product)] may be necessary. Refer to strobe's user manual for recommended connection / setting for dual strobe configuration.

[Optical D Slave Cable III] Compatible Strobe

Dedicated Optical D Slave cable to connect the S-2000 and compatible strobe in[Optical D Slave Cable Connection].
 
Master Strobe (Main Strobe)
S-2000
 
Slave Strobe (Sub strobe)
[Strobes compatible with pre-installed L-Connector.]
INON Z-330, D-200, S-2000, Z-240, D-2000
 
[Strobes requiring replacement of pre-installed L-Connector with optional "Sensor Plug Non-wireless".]
Z-240 Type3/Type2/Type1, D-2000 Type4/Type2/Tyep1, D-2000S, D-2000W/Wn, D-180, D-180S, Z-220, Z-220F, Z-220S

with Optical D Slave Cable III
with Optical D Slave Cable III

-When different strobes are used as a master and a slave-
unintentional imbalance may be observed except both strobes are set to Manual mode.
[e.g. Imbalance flash output though intending to create "flat lighting" with equal flash output from master / slave strobe etc.]
 
This is normal because each strobe model has unique specification like [maximum flash power / flash time / flash intensity per unit time] or imbalance caused by operational characteristic of slave flashing in each auto flash mode.
 
To adjust flash output balance, [flash output adjustment on each strobe], [using appropriate"diffuser"] or [attaching both strobe directly to camera system (without using this product)] may be necessary. Refer to strobe's user manual for recommended connection/setting for dual strobe configuration.
 
 
-When using [Optical D Slave Cable II Type L] / [Optical D Slave Cable III Type L] -
Only certain combination can have full benefit of this product. Refer to [Compatible master strobe] / [Compatible slave strobe] below for detail.

Optical D Cable Type L Option

Sensor Plug Non-wireless

Sensor Plug Non-wireless