Attaching this diffusers to S-2000 increases beam angle [105°x95°] to [110°x110°circular], and makes quality of light and shadows soften.
"Blue" Diffuser compensate / ease yellowish / reddish compensation characteristic mainly by Canon digital camera.

The INON "Snoot Set for S-2000" is an accessory for the INON "S-2000" to change beam angle. The various combination of packaged parts supports 6 different beam coverage with the following sophisticated effects [To block extra diffused light eliminating backscatter.] / [To highlight a subject by illuminating the subject only.] / [To give a spotlight effect on a subject etc.]

Optional kit to use "Wireless Connection". This package includes Mirror Units (strobe) and Camera Mirror, stickers to reliably transmit built-in flash light to the S-2000 in S-TTL Auto mode.
 
*This Wireless connector kit is included in the S-2000 strobe package. But it is sold separately from the Z-330 strobe, D-200 strobe, Z-240 Type4 strobe and the D-2000 Type4 strobe.

INON optical cable products use multicore optical fiber cable made from more than 200 fibers providing super durability and rigid reliability with minimum bending curvature 2mm which is quite different from single core optical fiber cable.

A set of an Optical D Cable Type L with Single Hole Rubber Bush Type L and Double Hole Rubber Bush Body. The rubber bush is directly linked with an underwater housing equipped with a cable adapter of 7 mm/0.3 in. diameter.

INON "Optical D Cable Type L / Cap Set" is a key component to reliably trigger an external strobe in synch with built-in flash light.
 
*Use correct Optical D Cable exclusively designed for each camera system.

Dedicated Optical D Slave cable to connect the S-2000 and compatible strobe in [Optical D Slave Cable Connection].

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide enormously comfortable strobe aiming.

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. Metal body enhances stability of combined arm.

A base adapter with aluminum alloy ball-joint. Attached on top edge of the Grip Base D4 to connect Arm Body or Z Adapter MV, or on an INON strobe as strobe adapter to lock strobe position securely by a clamp.

"Z Joint" is attached on [YS Adapter compatible arm] including "Grip Base D4" / "Shoe Base" etc. to set up compact strobe system and equipping with "YS Adapter"enables to attach on various strobe arms as like "Z-Adapter".

A set of Quick Holder Z and Quick Base S to use INON quick release system for INON Z-330, D-200, S-2000, Z-240, D-2000 strobes.

Optional product to attach one or two INON LE series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "D-2000" or "Z-240" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter MV"is necessary to use this product.

Optional product to attach one or two INON LF series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "D-2000" or "Z-240" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter II"is necessary to use this product.

A Shoe Base installing a strobe on an accessory show of an underwater housing.

Replacement O-Ring for the S-2000/D-200/D-2000.
INON yellow O-Rings contain lubricant in the O-Ring rubber. Yellow color for best contrast, so contaminants etc. are easier to see, and so it is harder to forget to install the O-Ring.

Special grease formulated to match INON yellow O-Rings. Can also be used with conventional black O-Rings.