INON

Lens Hood II  (compatible with both UWL-95 C24 M67/UWL-95 C24 M52)

JAN code : 4562121439702

click to enlarge
 
Set-up image

Set-up image

A lens hood for the UWL-95 C24 M67/UWL-95 C24 M52 wide conversion lens.
Using the Lens Hood II can block unnecessary light coming from outside of combined lens coverage to suppress flare/ghosting likely happen when shooting in backlight.Also attaching the Lens Hood II can protect lens surface and lens frame from accidental damage.
 
No vignetting* at wide end both on land and underwater when installing the Lens Hood II on the UWL-95 C24 series lens.
.
 
*Confirmed camera housings
Sony MPK-URX100A, Olympus PT-059, PT-058, PT-056
Please note that other housings have not been confirmed by INON and may have vignetting depending on combination and condition.
 
 -Outer diameter: φ114mm/4.5in
 -Length: [standalone] 53mm/2.1in
 -Weight: [air] 54 g/1.9 oz,  [underwater] approx.8 g/0.3 oz


*Not usable together with "Dome Lens Unit III" .

page top

M67 Type1 Screw Ring for UWL-95 C24

JAN code : 4562121439764

M67 Type1 ネジ環 for UWL-95 C24
 

A set of a threaded mount ring for the UWL-95 C24 M67 Type1 and fixing screws to replace with worn original screw ring or to convert screw ring from Type2 to Type1. Also installing this screw ring on the UWL-95 C24 M52 will convert the lens to UWL-95 C24 M67 Type1.
 
If you have any difficulty to remove original fixing screw(s) due to salt-build-up etc, do not proceed any further and consult your purchasing dealer for advice.

M67 Type2 Screw Ring for UWL-95 C24

JAN code : 4562121439771

 
M67 Type2 ネジ環 for UWL-95 C24

A set of a threaded mount ring for the UWL-95 C24 M67 Type2 and fixing screws to replace with worn original screw ring or to convert screw ring from Type1 to Type2. Also installing this screw ring on the UWL-95 C24 M52 will convert the lens to UWL-95 C24 M67 Type2.
 
If you have any difficulty to remove original fixing screw(s) due to salt-build-up etc, do not proceed any further and consult your purchasing dealer for advice.
 

Compatible camera system (as of April, 2020)
A housing with a lens port of 6 mm/0.2 inch or less distance between lens port edge and lens port surface.

page top

M52 Lens Holder for Float Arm (for UWL-95 C24 M52)

JAN code : 4562121439757

M52 レンズホルダー フロートアーム用
 

A lens holder attached on a Float Arm/Mega Float Arm/Mega Float Tube or on the M5 Joint installed on a Stick Arm/Multi Ball Arm to carry M52 series attachment lens. This lens holder can carry the UFL-M150 ZM80 Underwater Micro Fisheye Lens attached on the M27-M67 Mount Converter for UFL-M150 ZM80/Step-up Ring 52-67 as well.
 
 
・Weight: [air] 49 g/1.7 oz, [underwater] approx. 26 g/0.9 oz
 
・Compatible arm/base
Float Arm S/M/ML
Mega Float Arm S/M
Mega Float Tube S/M
M5 Joint installed on Stick Arm SS-T/S-T/M-T/L
M5 Joint installed on Multi Ball Arm ML/L/LL/XL

M52 Lens Holder S (for UWL-95 C24 M52)

JAN code : 4562121439733

M52 レンズホルダーS
 

A lens holder attached on an INON Arm, D Holder Extension Bar or Grip Base DIII with Rubber Grip to carry M52 series attachment lens. This lens holder can carry the UFL-M150 ZM80 Underwater Micro Fisheye Lens attached on the M27-M67 Mount Converter for UFL-M150 ZM80/Step-up Ring 52-67 as well.
 
 
・Weight: [air] 54 g/1.9 oz, [underwater] approx. 28 g/1.0 oz
 
・Compatible arm/base
Arm SS/S/M/L
YS Arm MS/M
Grip Base DIII with Rubber Grip D
Grip Base DII with Rubber Grip D
D Holder Extension Bar installed on Grip Base D4/Grip Base M1/D Holder

M52 Lens Holder W (for UWL-95 C24 M52)

JAN code : 4562121439740

M52 レンズホルダーW
 

A lens holder attached on an INON Arm to carry maximum two of M52 series attachment lenses. The lens holder is installed on an INON Arm sandwiched between Lens Holder [screw] and Lens Holder [hole] of this product. The Lens Holder [screw] is usable as M52 Lens Holder S and the Lens Holder [hole] is usable as M52 Lens Holder for Float Arm. This lens holder can carry the UFL-M150 ZM80 Underwater Micro Fisheye Lens attached on the M27-M67 Mount Converter for UFL-M150 ZM80/Step-up Ring 52-67 as well.
 
 
・Weight*: [air] 104 g/3.7 oz, [underwater] approx. 50 g/1.8 oz
*Whole component
 
・Compatible arm/base
1.When installing both lens caddies
Arm SS/S/M/L
YS Arm MS/M
 
2.When using Lens Holder [screw] as M52 Lens Holder S
Arm SS/S/M/L
YS Arm MS/M
Grip Base DIII with Rubber Grip D
Grip Base DII with Rubber Grip D
D Holder Extension Bar installed on Grip Base D4/Grip Base M1/D Holder
 
3.When using Lens Holder [hole] as M52 Lens Holder for Float Arm
Float Arm S/M/ML
Mega Float Arm S/M
Mega Float Tube S/M
M5 Joint installed on Stick Arm SS-T/S-T/M-T/L
M5 Joint installed on Multi Ball Arm ML/L/LL/XL

page top

M67 Lens Holder for Float Arm (for UWL-95 C24 M52)

JAN code : 4562121434127

M67 Lens Holder for Float Arm

A lens holder attached on Float Arm/Mega Float Arm or on the M5 Joint installed on Stick Arm/Multi Ball Arm to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater.
 

M67 Lens Holder S (for UWL-95 C24 M52)

JAN code : 4562121431713

M67 Lens Holder S

A lens holder attached on an Arm, D Holder Extension Bar etc. to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater.

M67 Lens Holder W (for UWL-95 C24 M52)

JAN code : 4562121431720

M67 Lens Holder W

A lens holder attached on an Arm, D Holder Extension Bar etc. to carry M67/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like M67 Lens Holder for Float Arm as well.

page top

Dome Port Cover S (for Dome Lens Unit III)

JAN code : 4562121438491

Dome Port Cover S

The Dome Port Cover S is made of neoprene as same as wet suits. It is recommended to put it on the Dome Lens Unit III all the time to prevent accidental damage whenever not in use. The Dome Port Cover S has slits on its top and bottom for integrated shades to help easy and speedy installation/removal.
.
 

*Never put wet cover on the Dome Lens Unit III on land. Doing so may cause degradation of the lens coating or glass itself resulting in spotting or discoloration.

Front Cover 110 (for UWL-95 C24 M67/UWL-95 C24 M52)

JAN code : 4562121438989

フロントカバーφ110

A cover designed for UWL-95 C24 M67/UWL-95 C24 M52 fitted with the Lens Hood II. This cover protect lens surface when not in use as the cover is made of elastic neoprene material.

UWL-100 Neoprene Carry Pouch (for UWL-95 C24 M67/UWL-95 C24 M52)

JAN code : 4562121431645

UWL-100 Neoprene Carry Pouch

A carry pouch made of neoprene which is used for wet suit and can be brought to underwater. It is recommended to put attachment lens in this carry pouch whenever not in use to prevent accidental damage.

page top