INON Diffuser 2 System

INON Diffuser widen strobe beam angle from 100 ° circular to 110 ° . Diffuser is recommended for wide shot or to cover variation of strobe positioning even with standard lens.

Flash output can be adjusted in 2 steps with different diffuser. -0.5 or -1.5 stop reduction can be obtained.
In S-TTL Auto mode operation with dual strobe configuration, shadow can be controlled by either attaching diffuser only one side or using different diffuser for each side.
Diffuser soften light from strobe, which helps to acquire natural image . The -0.5 Diffuser is recommended to attach all time except full flash amount is necessary.

White Diffuser adjusts flash output and widen beam angle with minimal color temperature change. The color temperature of strobe beam through White Diffuser is 5400K and designed to have same color temperature of sunlight.
*All INON Strobe designed to have color temperature of 5500K without a diffuser as same as sunlight to enhance natural color image.

Blue Diffuser is newly developed to take a subject with natural color.
Blue Diffuser suppress particular color compensation characteristic to be yellowish/reddish by mainly Canon digital camera to highlight healthy human skin.
[With Blue Diffuser] Sea lemon has natural and clear color. Canon IXY400 + D-2000 + -0.5 Blue Diffuser[Without diffuser] The color of the sea lemon gets yellow-red and less clear in entire image. Canon IXY400 + D-2000(No diffuser)

INON Z-240/D-2000/D-180 strobe is equipped with [External Auto mode] where built-in Light Adjustment Sensor on strobe's front side meters subject reflectivity to control flash output. This flash mode is a kind of semi-automatic exposure control since there is no exposure data communication between camera and strobe, so user needs to input camera's aperture value an ISO data in the strobe. Also strobe has to be properly aimed to a subject so that the Light Adjustment Sensor facing to a subject. The External Auto mode is useful for shooting situation where TTL Auto mode does not work well or for intentional flash output control.
The Diffuser2 (External Auto) has dedicated window for the Light Adjustment Sensor and supports all available strobe modes; External Auto, S-TTL Auto, TTL Auto, Manual + TTL Auto and Manual modes.

*If you mainly use S-TTL Auto and not using External Auto mode, then budget priced Diffuser 2 (TTL/Manual) would be recommended.

Light Adjustment SensorDedicated window for Light Adjustment Sensor

INON Diffuser 2 comes with two filters; a hollow diffusing filter[W40 ° Filter · LE」made from two laminated high transmittance optical grade acrylic fly-eye lens to extend Focus Light coverage up to 40 ° with less light attenuation, and [Red Filter · LE] not to stimulate light-sensitive subject for observation.

with W40°Filter·LEwith Red Filter・LE

■ -0.5 Blue Diffuser 2 (External Auto) (*image below)

■ -0.5 White Diffuser 2 (External Auto) (*image below)
■ -1.5 White Diffuser 2 (External Auto)

■ -0.5 Blue Diffuser 2 (TTL/Manual) (*image below)

■ -0.5 White Diffuser 2 (TTL/Manual) (*image below)
■ -1.5 White Diffuser 2 (TTL/Manual)

INON Diffuser System offers two types for different flash mode; Diffuser (External Auto) is for all flash modes; External Auto, S-TTL Auto, TTL Auto, Manual +TTL and Manual, while Diffuser(TTL/Manual) is for S-TTL Auto, TTL Auto, Manual + TTL and Manual mode.（*)Z-220 target laser switch is operable only with Diffuser (TTL/Manual).

■ -0.5 Blue Diffuser for S-2000