INON Components
■Joint
A joint adapter to attach INON D-2000/Z-240/S-2000 strobe on the Grip Base D4, YS Adapter or Shoe Base. |
■Adapter
A joint adapter to attach INON D-2000/Z-240/S-2000 strobe on INON Arm series. |
■Multi Direct Base II
A base adapter to attach an arm on a base or housing. Equipped with 10 screw holes to support various manufactures' products. |
■Clamp
Firmly connects INON Arm series products together as well as supports stress-free precise arm angle adjustment only by unclamping. | |||||||||||
■ Z Joint
"Shoe Base Set" combiend with Shoe Base is also available.
Installed on a strobeA joint adapter to attach INON Z-240/D-2000/S-2000 strobe on arm system. The Z Joint is attached on the Grip Base D4, D Holder, YS Adapter or Shoe Base.
■
Effective length: 26mm/1.0"
■
Weight: 45.5g/1.6oz (air), approx.22.8g/0.8oz (underwater)
■
Compatible strobe: INON S-2000, Z-240, D-2000, D-2000S, D-2000W/Wn
■
Compatible arm: INON Shoe Base, Grip Base D4, Grip Base M1, YS Adapter, YS Arm M, YS Arm MS, Bar Mount
There are two Arm Base design depending on production lot and only trapezoidal version can accept this product.
■ Z Adapter
Installed on a strobeAn adapter to attach INON S-2000 strobe, Z-240 strobe, D-2000 strobe series, Z-220 strobe series or D-180 strobe series on an Arm body or Float Arm via Clamp.
■
Effective length: 58mm/2.3"
■
Weight: 45g/1.6oz
■
Compatible strobe: INON S-2000, Z-240, D-2000, D-2000S, D-2000W/Wn, D-180, D-180S, Z-220F, Z-220, Z-220S
■ SB Adapter
An adapter to attach Nikon SB strobe series on an Arm body or Float Arm via Clamp.
■
Effective length : 45mm/1.8"
■
Weight : 40g/1.4oz (underwater : 31g/1.1oz)
■
Compatible strobe : Nikon SB103, SB105
■ YS Adapter
An adapter to attach INON Z-22 strobe, Sea&Sea YS strobe series.
■
Effective length : 48mm/1.9"
■
Weight : 40g/1.4oz (underwater 22g/0.8oz)
■
Compatible strobe : INON Z-22, Sea&Sea YS series
*Also compatible with INON S-2000, Z-240, D-2000, D-2000S, D-2000W/Wn, D-180, D-180S, Z-220F, Z-220, Z-220S via "Z Joint".
YS Adapter Option
■ Multi Direct Base II (left) / Multi Direct Base II long (right）
Firmly attached by two cap bolts. Ten mounting holes to support various manufacturers' arm system.
■
Effective length 40mm/1.6", Long : 76mm/3.0"
■
Weight (air/underwater) : 40g(1.4oz) / 22g(0.8oz),
Long :46g(1.6oz) / 28g(1.0oz)
■
Compatible -Housing : X-2, X1-NZ, X1-LZ
-Base: System Base II system, Grip Base DⅡ/DⅢ/D4/M1,
-Arm: Port Arm D
-Manufacture : Anthis, Kenko, Sea&Sea
■
Accessories : M6 cap bolt x 2, M5 cap bolt x 2, M6 flat washer x 2, M5 flat washer x 2, Allen wrench
■ Clamp
The Clamp is made of machined lightweight aluminum alloy and weighs only 55g/1.9oz. The thumbscrew type gives easy clamping and unclamping.
Not only allowing 360 degrees free oscillating movement between attached arm system, also gives approx. 80
°
movement along an extended line of attached arm.
