![]()

■ Grip BaseAn arm system for compact digital camera |
■ System Base IIAn arm system for SLR camera/film camera |
■ Shoe BaseA base to attach a strobe etc. on the hot shoe of an underwater housing. | ||||||||
A base stay with strobe arm function for compact digital camera housing. The Grip Base is machined aluminum to have lightweight body and securely attached to compatible housing. When attaching Z-240/D-2000/S-2000 strobe directly on the Grip Base D4, you can set up compact and simple strobe system.
A conventional flexible arm looks like useful with its wide compatibility for lighting, but it is hard to align the optical axis of an external strobe to a subject especially for beginners. You never have same situation since subject and environment alternates continuously. Lovely scene or subject doesn't wait until you are ready. Therefore we would suggest simple lighting system for perfect shot.
Optional wide variety of INON arm system further provides flexible and free strobe configuration to suits to shooting condition depending on a subject.
- No loose ! No rattle ! -
The Grip Base D4 has is equipped with newly developed SPS (Slide Plate System) and directly attached on more than 80 different water-proof housings. The SPS provides loose-proof structure by to-and-fro adjustable main plate and two sub plates to hold bottom part of compatible housing (Patent P.). As same as existing Grip Base, the Grip Base D4 is compatible with INON Mount Base (M67, AD, 28AD) to use INON Close-up Lens or Wide Conversion Lens.The loose-proof Grip Base D4 enables you to focus on shooting without any extra work to retighten strobe stay during use.
- Wireless strobe shooting ! -
Ultra compact [INON S-2000] benefits you to start external strobe shooting right away by its wireless function simply installed on[Grip Base D4 Set]. The powerful G.N. 20 and substantial features (high-precision wireless S-TTL, 12 step Manual flash mode) support you to capture underwater scenery vividly.- Unlimited expandability ! -





From Left , Z Joint / Shoe Base / Multi Direct Base II / Z Adapter / D Holder Extention Bar

Combination of "Grip Base D4" and "Z Joint" supporting wireless function of ultra compact "S-2000" strobe as well as "Z-240 Type4"/"D-2000 Type4".


Optional D Holder to add to this product as additional strobe arm for dual strobe configuration and/or to hold whole system with both hands.
<OLYMPUS>
| Camera | Housing |
|---|---|
| μTOUGH-8010 μTOUGH-6020 | PT-048 |
| μTOUGH-6000 | PT-047 |
| FE-3010 | PT-046 |
| μTOUGH-8000 | PT-045 |
| FE-360 | PT-044 |
| μ1030SW | PT-043 |
| μ1020 | PT-042 |
| μ850SW μ790SW | PT-041 |
| μ830 μ780 | PT-039 |
| SP-560UZ SP-550UZ | PT-037 |
| μ760 | PT-036 |
| μ795SW μ770SW | PT-035 |
| μ750 | PT-034 |
| μ725SW μ720SW | PT-033 |
| μ710 | PT-032 |
| SP-700 | PT-031 |
| SP-350 | PT-030 |
| μ600 | PT-029 |
| C-7070WZ | PT-027 |
| μ-40 | PT-026 |
| X-3 | PT-024 |
| C-8080WZ | PT-023 |
| C-770UZ C-760UZ | PT-022 |
| C-5060WZ | PT-027 |
| PT-020 | |
| C-755UZ C-750UZ C-745UZ C-740UZ | PT-018 |
| μ-30 μ-25 μ-20 μ-15 μ-10 | PT-016 |
| C-5050Z | PT-015 |
| X-2 X-1 | PT-014 |
| C-40Z | PT-012 |
| C-4100Z C-4040Z C-3100Z C-3040Z C-3030Z C-3000Z C-2040Z C-2020Z | PT-010 |
| C-300Z C-200Z | PT-009 |
| C-3040Z C-3030Z C-3000Z C-2040Z C-2020Z | PT-007 |
| C-3030Z C-2020Z | PT-005 |
| Camera | Housing |
|---|---|
| Olympus E-PL1 | PT-EP01*1 |
<Canon>
| Camera | Housing |
|---|---|
| IXY D220IS | WP-DC33 |
| IXY D510IS | WP-DC32 |
| IXY D210IS | WP-DC31 |
| IXY D110IS | WP-DC29 |
| IXY D3000IS | WP-DC27 |
| IXY D920IS | WP-DC26 |
| IXY D95IS | WP-DC24 |
| IXY D25IS | WP-DC23 |
| IXY D20IS | WP-DC22 |
| IXY D2000IS | WP-DC19 |
| IXY D910IS | WP-DC17 |
| IXY D810IS | WP-DC15 |
| IXY D90 | WP-DC14 |
| IXY D10 | WP-DC13 |
| IXY D900IS | WP-DC9 |
| IXY D1000 | WP-DC7 |
| IXY D800IS | WP-DC5 |
| IXY D70 | WP-DC4 |
| IXY D80 | WP-DC3 |
| IXY D700 | WP-DC80 |
| IXY D600 | WP-DC70 |
| IXY D500 IXY D450 IXY D400 | WP-DC800 |
| IXY D300a | WP-DC500 |
| IXY D300 | WP-DC100 |
| PowerShot S90 | WP-DC35 |
| PowerShot G11 | WP-DC34 |
| PowerShot G10 | WP-DC28 |
| PowerShot G9 | WP-DC21 |
| PowerShot A650IS | WP-DC18 |
| PowerShot A570IS | WP-DC12 |
| PowerShot G7 | WP-DC11 |
| PowerShot A540 | WP-DC2 |
| PowerShot S80 | WP-DC1 |
| PowerShot A95 | WP-DC50 |
| PowerShot S70 PowerShot S60 | WP-DC40 |
| PowerShot A75 PowerShotA85 | WP-DC30 |
| PowerShot S1 IS | WP-DC20 |
| PowerShot A80 | WP-DC900 |
| PowerShot A70 PowerShot A60 | WP-DC700 |
| PowerShot S50 PowerShot S45 PowerShotS40 PowerShot S30 | WP-DC300 |
| PowerShot A40 Powershot A30 | WP-DC200S |
| PowerShot A20 PowerShot A10 | WP-DC200S |
| WP-DC200 |
<Panasonic>
| Camera | Housing |
|---|---|
| LUMIX ZX3 | MCZX3 |
| LUMIX ZX1 | MCZX3 |
| MCZX1 | |
| LUMIX FT2 | MCFT2 |
| LUMIX FT1 | MCFT1 |
| LUMIX FX40 | MCFX40 |
| LUMIX FX37 LUMIX FX35 | MCFX35 |
| LUMIX FX33 LUMIX FX30 | MCFX30 |
| LUMIX FX07 LUMIX FX01 | MCFX07 |
| MCFX01 | |
| LUMIX FS3 | MCFS5 |
| LUMIX FS2 LUMIX FS1 | MCFX07 |
| LUMIX TZ10 | MCTZ10 |
| LUMIX TZ7 | MCTZ7 |
| LUMIX TZ5 | MCTZ5 |
| LUMIX TZ3 | MCTZ3 |
<FUJIFILM>
| Camera | Housing |
|---|---|
| Finepix F80EXR | WP-FXF80 |
| Finepix Z100fd Finepix Z200fd Finepix Z250fd | WP-FXZ100 |
| Finepix F200EXR | WP-FXF200 |
| Finepix F100fd | WP-FXF100 |
| Finepix F50fd | WP-FXF50 |
| Finepix F40fd | WP-FXF40 |
| Finepix F31fd Finepix F30 | WP-FXF30 |
| Finepix F11 Finepix F10 | WP-FXF10 |
| Finepix F810 Finepix F710 | WP-FX701 |
<SONY>
| Camera | Housing |
|---|---|
| T90 | MPK-THGB |
| T700 T77 | MPK-THGB |
| MPK-THG | |
| W300 W170 | MPK-WD |
| W7 W5 W1 | MPK-WA |
| N2 N1 | MPK-NA |
| P100 P150 | MPK-PHB |
<Nikon>
| Camera | Housing |
|---|---|
| E7900 E5900 | WP-CP4 |
| E5200 E4200 | WP-CP2 |
| E4100 E3200 E2200 | WP-CP1 |
*1右手側ホルダー部が手の甲に接触することがあります。左手側でご使用ください。

A base stay with strobe arm function for compact digital camera housing.
*The Grip Base DIII does not support wireless connection with S-2000/Z-240/D-2000. The Joint is not directly attached on the Grip Base DIII.

The System Base II is a base tray with arms to attach strobe(s) on INON X-2 series digital SLR housing, X-1 series housing, Nikonos V or Olympus genuine SLR housing.

The Main Base II is a fundamental component of the Holder II Set and attached on an underwater housing via two tripod screws or one tripod screw on Nikonos V to attach Arm II strobe arm system directly. The Holder II comfortably supports the back of your right hand with pre-installed 10mm neoprene rubber when holding INON X-2 series housing or Nikonos V and is slidingly adjustable to suits to different hand size. INON strobe arm system is directly attached on the Holder II.
・Weight: 210g/7.4oz(air), 66g/2.3oz(under surface)
■Set contents
Main Base II, Holder II
■Compatible Underwater Camera・Housing
INON X-2 for EOS10D , INON X-2 for EOS20D , INON X-2 for EOS30D ,
INON X-2 for EOS50D/40D , INON X1-Z , INON X1-NZ, INON X-LZ ,
Nikonos V ,NikonosRS ,
Olympus PT-E03 , Olympus PT-E05, Olympus PT-E06
*Nikonos V/RS is fixed by single tripod screw.

The Grip Bar III is equipped on the left hand side of the Main Base II, which is adjustable sideway supporting focusing/zooming operation with holding the grip. INON strobe arm system is attached on the Grip Bar III.
・Weight: 408g/14.4oz(air), 196g/6.9oz(under surface)
■Set contents
Main Base II, Holder II, Grip Bar III Set
■Compatible Underwater Camera・Housing
INON X-2 for EOS10D , INON X-2 for EOS20D , INON X-2 for EOS30D ,
INON X-2 for EOS50D/40D , INON X1-Z , INON X1-NZ, INON X-LZ ,
Nikonos V ,NikonosRS ,
Olympus PT-E03 , Olympus PT-E05, Olympus PT-E06
Holder II
The Holder II comfortably supports the back of your right hand when holding a housing or Nikonos V. INON strobe arm system is directly attached on the Holder II. |
Main Base II
The Main Base II is a key product to use various accessories and attached on Nikonos V via single tripod screw and on an underwater housing via two tripod screws. |
Gripbar III Set
The Grip Bar III Set is a grip for left hand side and adjustable space between a housing body. |
W Base II
The W Base II connects the Main Base II(either side) or X1-G/X1-LG (left hand side)and Arm II strobe arm system. | |||||||||||

INON "Shoe Base Set" enables INON strobe directly attached on compact digital camera underwater housing to provide more "compact" and "reasonable" set-up. Simply installs the Shoe Base Set on the hot-shoe of Panasonic marine-case including [DMW-MCFS5] [DMWMCFX40] [DMW-MCTZ7] or underwater housing from Olympus, Fujifilm and anybody can benefit external strobe shooting with compact gears without complicated setting. The Shoe Base Set is only 68.5mm in length. Boon to divers to keen to "diet" diving gears or divers hesitating to have external strobe.
Hook Plate
Easy installation with the hook plate which has "nails" to grasp marine case hot shoe to prevent accidental separation.
Move back and fotth
The Z Joint can move back and forth to accommodate with different strobe distance.
Rotate 360˚
Shoe Base can rotate 360˚. You can move strobe not only up-and-down but also sideways to adjust strobe aiming..
Wireless connection example of S-2000 with Panasonic DMW-MCFX40
Z Joint |
Shoe Base Adapter D4 |
Shoe Base Set (PDF:258KB)Set contents : Z Joint, Shoe Base
| ||||||||
<Remarks>
○:Copatible ▲:To be confirmed ―:Not compatible
| Camera | Housing | Compatibility | Note |
|---|---|---|---|
| μTOUGH-8010 μTOUGH-6020 | PT-048 | ○ | |
| μTOUGH -6000 | PT-047 | ○ | |
| FE-3010 | PT-046 | ― | |
| μTOUGH -8000 | PT-045 | ○ | |
| FE-360 | PT-044 | ― | |
| μ1030SW | PT-043 | ○ | |
| μ1020 | PT-042 | ○ | |
| μ850SW μ790SW | PT-041 | ○ | *1 |
| μ830 μ780 | PT-039 | ○ | |
| SP-560UZ SP-550UZ | PT-037 | ○ | *2 |
| μ760 | PT-036 | ○ | |
| μ795SW μ770SW | PT-035 | ○ | *1 |
| μ750 | PT-034 | ○ | |
| μ725SW μ720SW | PT-033 | ○ | *1 |
| μ710 | PT-032 | ― | |
| SP-700 | PT-031 | ― | |
| SP-350 | PT-030 | ○ | |
| μ600 | PT-029 | ○ | |
| C-7070WZ | PT-027 | ― | |
| μ-40 | PT-026 | ― | |
| X-3 | PT-024 | ― | |
| C-8080WZ | PT-023 | ― | |
| C-770UZ C-760UZ | PT-022 | ― | |
| C-5060WZ | PT-027 | ― | |
| PT-020 | |||
| C-755UZ C-750UZ C-745UZ C-740UZ | PT-018 | ― | |
| μ-30 μ-25 μ-20 μ-15 μ-10 | PT-016 | ― | |
| C-5050Z | PT-015 | ― | |
| X-2/X-1 | PT-014 | ― | |
| C-40Z | PT-012 | ― | |
| C-4100Z C-4040Z C-3100Z C-3040Z C-3030Z C-3000Z C-2040Z C-2020Z | PT-010 | ― | |
| C-300Z C-200Z | PT-009 | ― | |
| C-3040Z C-3030Z C-3000Z C-2040Z C-2020Z | PT-007 | ― | |
| C-3030Z C-2020Z | PT-005 | ― |
| Camera | Housing | Compatibility | Note |
|---|---|---|---|
| LUMIX ZX3 | MCZX3 | ○ | |
| LUMIX ZX1 | MCZX3 | ○ | |
| MCZX1 | |||
| LUMIX FT2 | MCFT2 | ○ | |
| LUMIX FT1 | MCFT1 | ○ | |
| LUMIX FX40 | MCFX40 | ○ | |
| LUMIX FX37 LUMIX FX35 | MCFX35 | ○ | |
| LUMIX FX33 LUMIX FX30 | MCFX30 | ― | |
| LUMIX FX07 LUMIX FX01 | MCFX07 | ― | |
| MCFX01 | |||
| LUMIX FS3 | MCFS5 | ○ | |
| LUMIX FS2 LUMIX FS1 | MCFX07 | ― | |
| LUMIX TZ10 | MCTZ10 | ○ | |
| LUMIX TZ7 | MCTZ7 | ○ | |
| LUMIX TZ5 | MCTZ5 | ○ | |
| LUMIX TZ3 | MCTZ3 | ― |
| Camera | Housing | Compatibility | Note |
|---|---|---|---|
| Finepix F80EXR | WP-FXF80 | ○ | |
| Finepix Z100fd Finepix Z200fd Finepix Z250fd | WP-FXZ100 | ― | |
| Finepix F200EXR | WP-FXF200 | ○ | |
| Finepix F100fd | WP-FXF100 | ○ | |
| Finepix F50fd | WP-FXF50 | ― | |
| Finepix F40fd | WP-FXF40 | ― | |
| Finepix F31fd Finepix F30 | WP-FXF30 | ― | |
| Finepix F11 Finepix F10 | WP-FXF10 | ― | |
| Finepix F810 Finepix F710 | WP-FX701 | ― |
| Camera | Housing | Compatibility | Note |
|---|---|---|---|
| Power Shot S90 | WP-DC35 | ○ | *3 |
| Camera | Housing | Compatibility | Note |
|---|---|---|---|
| E-PL1 | PT-EP01 | ○ | |
| E-620 | PT-E06 | ○ | |
| E-520 | PT-E05 | ○ | |
| E-410 | PT-E03 | ○ | *2 |
| Camera | Housing | Compatibility | Note |
|---|---|---|---|
| iVIS HF M31 | WP-V2 | ○ | *4 |
| iVIS HF 21 | WP-V1 | ○ | *4 |
| iVIS HF 20 | WP-V1 | ○ | *4 |
*1 Only following fiber optics products are compatible when using the Shoe Base.
Customers using following fiber optics product to connect a camera system and strobe, need to modify them with optional Shade Panel PT-033/035/041/043 to make them equivalent to Optical D Cable Cap W42 Set with Clear Photo System Film
*2 When using the Shoe Base, Optical D Cable Cap Set is not usable. Use wireless connection.
*3 対応ハウジング「WP-DC35」単体では、シューベースを取り付けることが出来ません。
別途「28ADマウントベース・DC35」をご用意頂き、マウントベースにシューベースを取り付け下さい。
*4 対応ハウジング「WP-V1」「WP-V2」単体では、シューベースを取り付けることが出来ません。
別途対応するビデオベースをご用意頂き、ビデオベース側にシューベースを取り付けて下さい。
![]()